Aryl Halides Research Articles

Cross-Coupling Between Aryl Halides and Aryl Alkynes Catalyzed by an Odd Alternant Hydrocarbon.

Catalytic cross-coupling between aryl halides and alkynes is considered an extremely important organic transformation (popularly known as the Sonogashira coupling) and it requires a transition metal-based catalyst. Accomplishing such transformation without any transition metal-based catalyst in the absence of any external stimuli such as heat, photoexcitation or cathodic current is highly challenging. This work reports transition-metal-free cross-coupling between aryl halides and alkynes synthesizing a rich library of internal alkynes without any external stimuli. A chemically double-reduced phenalenyl (PLY)-based molecule with the super-reducing property was employed for single electron transfer to activate aryl halides generating reactive aryl radicals, which subsequently react with alkyne. This protocol covers not only various types of aryl, heteroaryl and polyaryl halides but also applies to a large variety of aromatic alkynes at room temperature. With a versatile substrate scope successfully tested on more than 75 entries, this radical-mediated pathway has been explained by several control experiments. All the key reactive intermediates have been characterized with spectroscopic evidence. Detailed DFT calculations have been instrumental in portraying the mechanistic pathway. Furthermore, we have successfully extended this transition-metal-free catalytic strategy for the first time towards solvent-free cross-coupling between solid aryl halide and alkyne substrates.

Remote-Carbonyl-Directed Consecutive Arylation of Terminal Alkenes for the Synthesis of Tetrasubstituted Olefins

The highly efficient synthesis of all-carbon tetrasubstituted olefins has been concerned for decades, especially for multi-aryl substituted olefins which widely used in functional organic materials and pharmaceuticals. This work presents a carbonyl-directed palladium-catalyzed consecutive arylation of terminal alkenes with aryl iodides under mild conditions, a series of triarylated tetrasubstituted olefins were obtained in moderate yields. Because a weak chelation effect is generally difficult to support such a thorough tri-fold Heck arylation, and the β-trans-selective alkenyl C–H activation cannot be achieved via a twisted endo-metallacyclic intermediate, thus, the key to success is the compatibility between several mechanisms, including Heck, C–H activation and E,Z-isomerization. Here, the judicious selection of a flexible-alkyl-chain-tethered carbonyl group seems to be critical, it provides a proper chelation effect that not only assists a distal alkenyl functionalization or isomerization, but also avoids byproducts caused by other possible β-H elimination or migration. The strategy developed herein greatly streamlines the preparation of the target molecules, and the protocol covers a range of readily available terminal alkenes bearing native directing groups (e.g., aldehyde, ketone and ester), and aryl iodides.

Synthesis of (Hetero)biaryls via Nickel Catalyzed Reductive Cross‐Electrophile Coupling Between (Hetero)aryl Iodides and Bromides

(Hetero)biaryls are fundamental building blocks in the pharmaceutical industry and rapid access to these scaffolds is imperative for the success of numerous medicinal chemistry campaigns. Herein, a highly general, mild, and chemoselective reductive cross‐electrophile coupling between (hetero)aryl iodides and heteroaryl bromides is reported. By employing more reactive (hetero)aryl halides, a broad range of successful substrates (45 examples) were identified. The reaction was also found to be chemoselective for C(sp2)–C(sp2) bond formation between (hetero)aryl iodides and bromides over (hetero)aryl chlorides, which were generally inert under the described reaction conditions. The efficiency of the procedure is also further demonstrated in parallel synthesis library format, on gram scale, as well as in the formal synthesis of Ruxolitinib, a potent JAK inhibitor. As such, we anticipate this method will find widespread utility in the assembly of (hetero)biaryls for medicinal chemistry efforts.

Palladium-Catalyzed Arylations towards 3,6-Diaryl-1,3a,6a-triazapentalenes and Evaluation of Their Fluorescence Properties

Methyl 4-(1,3a,6a-triazapentalen-3-yl)benzoate (TAP1) shows interesting properties as a small molecule fluorophore. In the search for post-functionalization methods, palladium-catalyzed arylation reactions were demonstrated. Direct CH arylation reactions of TAP1 with various aryl halides resulted in 3,6-diaryltriazapentalenes TAP4, although mostly in poor yields. Bromination of TAP1 followed by Suzuki coupling, on the other hand, requires a more delicate procedure, but gave arylated products with the same regiochemistry (TAP4) in moderate to good yields. The structure of 6-phenyltriazapentalene TAP4a was confirmed by crystallographic analysis. In addition, the effect of the C6 arylation on the fluorescent properties of 3-aryl-1,3a,6a-triazapentalenes was studied in dichloromethane at room temperature and in 2-methyltetrahydrofuran at 77K, while the photophysical properties of two saponified derivatives were measured in acetonitrile.

Directed C(sp3)-H Arylation of Free α-Aminophosphonates: Dual Models Exploration via Palladium Catalysis.

In this report, we present the dual activation models for transient directing group-directed and amino-self-directed Pd-catalyzed α-aminophosphonate side-chain C(sp3)-H arylation. Both strategies showed facile, efficient, and single regioselectivity in the reaction between free α-aminophosphonates and aryl iodides. Furthermore, the modification of amino and late-stage functionalization of the C(sp3)-P bond from products indicates potential applications for α-aminophosphonates.

Organic Donor–Acceptor Thermally Activated Delayed Fluorescence Photocatalysts in the Photoinduced Dehalogenation of Aryl Halides

AbstractWe report a family of donor‐acceptor thermally activated delayed fluorescent (TADF) compounds based on derivatives of DMAC‐TRZ, that are strongly photoreducing. Both Eox and thus E*ox could be tuned via substitution of the DMAC donor with a Hammett series of p‐substituted phenyl moieties while Ered remained effectively constant. These compounds were assessed in the photoinduced dehalogenation of aryl halides, and analogues bearing electron withdrawing groups were found to produce the highest yields. Substrates of up to Ered=−2.72 V could be dehalogenated at low PC loading (1 mol %) and under air, conditions much milder than previously reported for this reaction. Spectroscopic and chemical studies demonstrate that all PCs, including literature reference PCs, photodegrade, and that it is these photodegradation products that are responsible for the reactivity.

Application of Biaryl Phosphacycles in Palladium‐Catalysed Suzuki‐Miyaura Cross‐Coupling Reactions of Aryl Chlorides

AbstractThe use of Pd‐catalysts based on biaryl phosphacycles allowed facile Suzuki‐Miyaura couplings of a wide range of deactivated, sterically hindered, and heteroaryl chloride substrates with aryl boronic acids. Notably, the strongly electron‐deficient and sufficiently hindered biaryl phosphacycle ligand 7 consistently demonstrated effective performance.

Site‐Selective Ortho/Ipso C‐H Difunctionalizations of Arenes using Thianthrene as a Leaving Group

Site‐selective ortho/ipso C‐H difunctionalizations of aromatic compounds were designed to afford polyfunctionalized arenes including challenging 1,2,3,4‐tetrasubstituted ones (62 examples, up to 97% yields). To ensure the excellent regioselectivity of the process while keeping high efficiency, an original strategy based on a “C‐H thianthenation/Catellani‐type reaction” sequence was developed starting from simple arenes. Non‐prefunctionalized arenes were first regioselectively converted into the corresponding thianthrenium salts. Then, a palladium‐catalyzed, norbornene (NBE)‐mediated process allowed the synthesis of ipso‐olefinated/ortho‐alkylated polyfunctionalized arenes using a thianthrene as a leaving group (revisited Catellani reaction). Pleasingly, using a commercially available norbornene (NBE) and a unique catalytic system, synthetic challenges known for the Catellani reaction with aryl iodides were smoothly and successfully tackled with the “thianthrenium” approach. The protocol was robust (gram‐scale reaction) and was widely applied to the two‐fold functionalization of various arenes including bio‐active compounds. Moreover, a panel of olefins and alkyl halides as coupling partners was suitable. Pleasingly, the “thianthrenium” strategy was successfully further applied to the incorporation of other groups at the ipso (CN/alkyl/H, aryl) and ortho (alkyl, aryl, amine, thiol) positions, showcasing the generality of the process.

Site-Selective Ortho/Ipso C-H Difunctionalizations of Arenes using Thianthrene as a Leaving Group.

Site-selective ortho/ipso C-H difunctionalizations of aromatic compounds were designed to afford polyfunctionalized arenes including challenging 1,2,3,4-tetrasubstituted ones (62 examples, up to 97% yields). To ensure the excellent regioselectivity of the process while keeping high efficiency, an original strategy based on a "C-H thianthenation/Catellani-type reaction" sequence was developed starting from simple arenes. Non-prefunctionalized arenes were first regioselectively converted into the corresponding thianthrenium salts. Then, a palladium-catalyzed, norbornene (NBE)-mediated process allowed the synthesis of ipso-olefinated/ortho-alkylated polyfunctionalized arenes using a thianthrene as a leaving group (revisited Catellani reaction). Pleasingly, using a commercially available norbornene (NBE) and a unique catalytic system, synthetic challenges known for the Catellani reaction with aryl iodides were smoothly and successfully tackled with the "thianthrenium" approach. The protocol was robust (gram-scale reaction) and was widely applied to the two-fold functionalization of various arenes including bio-active compounds. Moreover, a panel of olefins and alkyl halides as coupling partners was suitable. Pleasingly, the "thianthrenium" strategy was successfully further applied to the incorporation of other groups at the ipso (CN/alkyl/H, aryl) and ortho (alkyl, aryl, amine, thiol) positions, showcasing the generality of the process.

C–heteroatom coupling with electron-rich aryls enabled by nickel catalysis and light

AbstractNickel photoredox catalysis has resulted in a rich development of transition-metal-catalysed transformations for carbon–heteroatom bond formation. By harnessing light energy, the transition metal can attain oxidation states that are difficult to achieve through thermal chemistry in a catalytic manifold. For example, nickel photoredox reactions have been reported for both the synthesis of anilines and aryl ethers from aryl(pseudo)halides. However, oxidative addition to simple nickel systems is often sluggish in the absence of special, electron-rich ligands, leading to catalyst decomposition. Electron-rich aryl electrophiles therefore currently fall outside the scope of many transformations in the field. Here we provide a conceptual solution to this problem and demonstrate nickel-catalysed C–heteroatom bond-forming reactions of arylthianthrenium salts, including amination, oxygenation, sulfuration and halogenation. Because the redox properties of arylthianthrenium salts are primarily dictated by the thianthrenium, oxidative addition of highly electron-rich aryl donors can be unlocked using simple NiCl2 under light irradiation to form the desired C‒heteroatom bonds.

Frustrated Radical Pair‐Initiated Hydrodehalogenation of Alkyl and Aryl Halides Under Visible Light

Frustrated Radical Pair‐Initiated Hydrodehalogenation of Alkyl and Aryl Halides Under Visible Light

Thermal Nickel-Catalyzed Carbon–Oxygen Cross-Coupling of (Hetero)aryl Halides with Alcohols Enabled by the Use of a Silane Reductant Approach

Thermal Nickel-Catalyzed Carbon–Oxygen Cross-Coupling of (Hetero)aryl Halides with Alcohols Enabled by the Use of a Silane Reductant Approach

Cross-Electrophile Coupling of 2-Iodoglycals Enables Efficient Access to 2-C-Glycals

A general strategy was developed for synthesizing of 2-C-glycals through a nickel-catalyzed cross-electrophile coupling reaction of 2-iodoglycals with (hetero)aryl iodides. Key to the success of this methodology is the use of an electron-deficient bipyridyl ligand. This innovative approach facilitates the efficient construction of 2-C-glycals, thereby broadening the synthetic repertoire available for glycochemistry.

Catalysed Aryl Amine Syntheses via Azides: From Azidation of Aryl Halides to Azide Reduction and Direct Amination

This review summarises and discusses aryl amine and azide syntheses from aryl halides employing azides. The majority of the reported reactions proceed with copper catalysis or mediation. Often, an aryl azide is formed in the first step, which is then reduced in situ to an aryl amine in a second step. The occurrence of the second step, the reduction, depends on the chosen reaction conditions and the substrates. The formation of only aryl azides through Cu‐mediated C–N bond formations is discussed, followed by mediated and catalytic aryl azide reduction employing different catalytic systems, and azidation with in situ azide reduction to amines, viz. azidation‐amination strategies. The azidation‐amination allows for the synthesis of complex heterocycles in multi‐step one‐pot procedures, of which several are summarised here. Examples of the application of azidation‐amination for synthesising important aryl amines employed in or as biologically active compounds, catalysis and materials science are also summarised. Finally, conducted control reactions have been collected and discussed in combination with mechanistic proposals. This literature survey allows us to pinpoint design criteria for the azide reduction to valuable amines, which includes the choice of reaction conditions such as solvent system and additives, involved metal and promising substrates.

A copper- and amine-free sonogashira reaction catalyzed by a supported bis(oxime palladacycle) on magnetized SBA-15

The recently reported magnetic catalyst, Fe3O4@SBA-bis(oxime palladacycle), was incorporated in the Sonogashira reaction. The potential catalytic activity of the catalyst was evaluated by optimizing the reaction conditions. It was discovered that using dimethylsulfoxide (DMSO) as a solvent, a catalyst loading of 0.25 mol% palladium, Cs2CO3 as a base, and a reaction temperature of 120 °C resulted in the highest yields. The catalyst showed excellent activity with a wide range of aryl halides and aryl acetylenes in the Sonogashira reaction. The use of a low catalyst loading further highlighted its efficiency. Moreover, the catalyst demonstrated noteworthy reusability by consistently preserving its activity and stability through seven successive runs. The magnetic properties of the catalyst allowed for easy separation and recovery.

Access to 2-Alkenyl-furans via a Cascade of Pd-Catalyzed Cyclization/Coupling Followed by Oxidative Aromatization with DDQ.

An unprecedented DDQ-mediated oxidative aromatization of 2-bezylidene-dihydrofurans yielding 2-alkenyl-furans is disclosed. Integration of this transformation with a prior Pd-catalyzed reaction of α-propargylic-β-ketoesters and (hetero)aryl halides into a one-pot cascade process opens a direct modular route to highly substituted 2-vinyl-furans. Experimental and computational studies reveal that the crucial step of the oxidative-aromatization involves facile hydride transfer from the dihydrofuran ring to the O-center of DDQ.

Beyond Tertiary Amines: Introducing Secondary Amines by Palladium/Norbornene‐Catalyzed Ortho Amination

AbstractSince the discovery of the palladium/norbornene (Pd/NBE)‐catalyzed ortho amination in 2013, escaping the limitation of only yielding tertiary anilines has been a long‐standing challenge. Here, we describe that, by carefully choosing the phosphine ligand and NBE mediator, the installation of a N‐mono‐alkylamino group becomes feasible. The reaction tolerates a wide range of aryl iodide substrates and various N‐mono‐tertiary alkylamine‐derived electrophiles. Both ipso alkenylation and alkynylation can be realized. The synthetic utility of this method is exemplified by the formation of primary amino group via selective deprotection and streamlined access to N‐heterocycles. Preliminary success of installing a bulky N‐secondary alkylamino group and a mechanistic understanding of the decomposition pathways of mono N‐alkylamine electrophiles have been obtained.

Beyond Tertiary Amines: Introducing Secondary Amines by Palladium/Norbornene-Catalyzed Ortho Amination.

Since the discovery of the palladium/norbornene (Pd/NBE)-catalyzed ortho amination in 2013, escaping the limitation of only yielding tertiary anilines has been a long-standing challenge. Here, we describe that, by carefully choosing the phosphine ligand and NBE mediator, the installation of a N-mono-alkylamino group becomes feasible. The reaction tolerates a wide range of aryl iodide substrates and various N-mono-tertiary alkylamine-derived electrophiles. Both ipso alkenylation and alkynylation can be realized. The synthetic utility of this method is exemplified by the formation of primary amino group via selective deprotection and streamlined access to N-heterocycles. Preliminary success of installing a bulky N-secondary alkylamino group and a mechanistic understanding of the decomposition pathways of mono N-alkylamine electrophiles have been obtained.

(2S)-2-(Difluoro(methoxy)methyl)pyrrolidine-1-sulfinyl fluoride as a new reagent in the Cl/F exchange reactions with aryl and alkyl sulfonyl chlorides

The reaction of (2S)-2-(difluoro(methoxy)methyl)pyrrolidine-1-sulfinyl fluoride with aryl, heteryl and alkyl sulfonyl chlorides provides a convenient synthetic route to sulfonyl fluorides. DFT calculations predict negative reaction energy values for the exchange reaction. The S-F bond energy is higher in the sulfonyl fluorides than that in sulfinyl fluorides.

Mechanical-Force-Induced Non-spontaneous Dehalogenative Deuteration of Aromatic Iodides Enabled by Using Piezoelectric Materials as a Redox Catalyst.

The development of green and efficient deuteration methods is of great significance for various fields such as organic synthesis, analytical chemistry, and medicinal chemistry. Herein, we have developed a dehalogenative deuteration strategy using piezoelectric materials as catalysts in a solid-phase system under ball-milling conditions. This non-spontaneous reaction is induced by mechanical force. D2O can serve as both a deuterium source and an electron donor in the transformation, eliminating the need for additional stoichiometric exogenous reductants. A series of (hetero)aryl iodides can be transformed into deuterated products with high deuterium incorporation. This method not only effectively overcomes existing synthetic challenges but can also be used for deuterium labelling of drug molecules and derivatives. Bioactivity experiments with deuterated drug molecule suggest that the D-ipriflavone enhances the inhibitory effects on osteoclast differentiation of BMDMs in vitro.